| Customization: | Available |
|---|---|
| Appearance: | Liquid |
| Usage: | Rubber Auxiliary Agents, Plastic Auxiliary Agents, Electronics Chemicals |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features of the hand - feeling oil product: It is a two - component silicone spray hand - feeling oil (hand - feeling oil + platinum water). It is a high - tensile hand - feeling oil with a smooth touch and strong adhesion. After spraying on the surface of silicone products, it can prevent dust adhesion and has a certain anti - static property. It is suitable for various silicone products such as silicone mobile phone cases, silicone buttons, silicone tubes, silicone sheets, silicone handicrafts, and silicone body models, enhancing the smooth touch feeling when touched.
Note: Different product gloss effects can be formulated according to different requirements of customers.
Usage method:
1. Perform secondary vulcanization on the silicone material (at 150°C for 1 - 2 hours) and clean the surface.
2. Dilute the ink with thinner before use. The dilution ratio is: 1 part of ink to 5 - 6 parts of thinner. When diluting, add the thinner in batches following the principle of starting with a small amount and gradually increasing it. After dilution, add 3% - 4% of platinum water based on the amount of ink, stir well, filter through a 300 - 400 mesh filter cloth, and then use it for machine or manual spraying.
3. Let it stand in a dust - free environment for 2 - 5 minutes before vulcanization.
4. Baking temperature and time: For high - temperature hand - feeling oil, the oven temperature is 170 - 220°C, and it usually takes 5 - 15 minutes to dry.
Special Precautions:
1. This product should be stored in a sealed container in a cool, dry, and well - ventilated place. The storage period is six months. If the product has exceeded the storage period, it can still be used after passing the technical inspection.
2. The product should be thoroughly mixed before use. When preparing the ink, the platinum solution should be added after the ink is diluted, and then mixed evenly.
3. Good and suitable conditions should be maintained during spraying. It is recommended that the operating room be dust - free, with the temperature controlled between 20 - 30°C and the humidity between 55 - 75%. Too low a temperature may lead to poor leveling and reduced adhesion. Excessive humidity can easily cause shrinkage cavities in the coating, while too low humidity can lead to electrostatic dust pollution and safety hazards.
4. A step - by - step temperature increase method should be adopted for vulcanization. If the product is baked immediately after spraying at a high temperature, it will result in uneven surface gloss.
5. The prepared ink should be used up within 8 hours. Sealed refrigeration (0 - 10°C) can extend the storage time.
| Product name | High-temperature and High-tensile Hand-feeling Oil |
| Model | CMJ-TY |
| Function | Enhance the smooth hand-feeling of silicone products, and has the functions of dust prevention and anti-static, etc. |
| Scope of Application | Various silicone products processed by molding, extrusion, calendering, etc. |
| Selling Points |
It can maintain high tensile strength when baked at 170ºC or above, with a smooth hand-feeling. It will not turn white when stretched, is suitable for products of various colors, and has good adhesion.
|
1. Are you a manufacturer or trading company?
--We are a manufacturer, silicone rubber and silicone auxiliaries are our main products. We provide customers with convenient one-stop procurement.
2. what products do you offer ?
--we produce various HTV silicone rubbers (precipitated silicone, fumed silicone, powder silicone, etc), color masterbatch for silicone rubber compound, color paste for LSR, platinum vulcanizing agents, DBPH vulcanizing agent, DCBP, silicone defrosting agents, release agents, hand feel oils, treatment agents etc.
3. Do you provide free samples?
--Yes, we offer free samples to start cooperation.
4. How long to get the sample ?
--Usually 2 days for preparing samples, 5-7 days for shipping.
5. What are required for silicone color matching?
-- If clients with stringent color matching requirements, we need clients to offer their color samples and about 200 grams their silicone rubber. For less strict requirements, providing us with a Pantone color code or selecting from our existing color samples.
6. Do your products come with test reports ?
--Yes they do. We update our reports every year.
7.-How long is the lead time for bulk order?
For silicone rubber, 1--2days for 1 ton, 14--15 days for 20 tons.
For silicone auxiliaries, 3--7days for 1 ton, 7--10days for 2 tons.
8.What is your MOQ ?
--For silicone rubber, MOQ is 500KGS
For other silicone auxiliaries, MOQ is 5KGS
9. How do you ensure your quality ?
--for all the samples we sent to clients, we will save the same original samples in factory, include the formula. Before the bulk shipment, all products must be tested according to samples.
10. If there is a quality issue, what will you do ?
--If it is confirmed that the issue is on our side, we will immediately conduct a root cause analysis and communicate with the customer to determine if corrective actions are needed. If the customer has incurred any losses, we will provide appropriate compensation or offer a replacement/refund. Subsequently, we will optimize our processes and strengthen quality control to ensure customer satisfaction.
){kind=link}